Billingham
Billingham Superflex - Black
Pickup available at Camera West Rancho Mirage
Usually ready in 24 hours
Note: Pickup not immediately available for Pre-Orders
- Each Superflex Partition (except the 'Superflex Flap') is constructed with two sections and can store a different item on each side. For some sizes, this can be two lenses.
- Attaches inside the 550, 5-Series, and 7-Series bags that have Velcro strips inside (some very old Billingham bags didn't have this Velcro sewn in.
- Constructed from fabric-covered closed-cell foam and made at the Billingham factory in England.
- See "Tech Specs" for more info.
SuperFlex Partitions are used to separate equipment inside some Billingham bags. The dividers inside them are positioned to provide one square compartment. Please note that these are designed to work with the padded base purchased with Billingham bags - SuperFlex Dividers do not have a base of their own.
With so many different lenses and other delicate equipment available today, Billingham made sure to develop quite a range of SuperFlex models to accommodate them. There is a good selection of sizes that should cover almost every need, protecting your valuable investment from the worst bumps and bashes.
When choosing it is important to remember the walls are the partitions are slightly flexible so may fit lenses slightly larger than you expect if you are happy with a tighter fit.
Superflex Partitions are always 15cm front-to-back - this is so they can sit front-to-back in the main compartment of a 225, 335, 445, 555, 550, 107, 207, 307, 307L, or similar bag.
When choosing the correct SuperFlex it is important to remember that the walls and the partitions have a little flexibility so may fit lenses slightly wider than you expect if you are happy with a snug fit.
Attach Using Velcro®
All SuperFlex partitions attach using the Velcro® strips that are inside the 5-series, 7-series, and 550 bags.
The latest bags have two Velcro® strips on the inside walls, whereas older models have only one strip of Velcro®. SuperFlex partitions should still attach using only one Velcro® strip you may just need to push down as you secure the partition.
Some of our very old bags don't have this Velcro® sewn in, contact us if you need advice on this.
Design
Each Superflex Partition is 15cm (5⅞") front to back with a sewn-in partition at varying measurements.
SuperFlex Partitions do NOT have a base in them, as they are designed to be used in conjunction with the SuperFlex base.
SuperFlex partitions allow you to keep equipment neat and tidy in our larger bags, whilst keeping your equipment protected.
You can store many items in SuperFlex partitions, from lenses and camera bodies to flashguns and cables.
Padding
Whilst the padding may not look very thick, the SuperFlex Partitions are made of dense, closed-cell foam that provides a high level of protection.
In response to customer feedback and when new foam became available, SuperFlex Partitions were updated to newer foam that has significantly greater robustness and longevity.
The foam is also now covered in PU-coated polyester material, instead of the cotton fabric previously. This makes the Partition lighter and prevents adding unwanted, additional weight to your bag.
'Billingham England' Label
SuperFlex Partitions that are included with a bag as standard, will not have a Billingham label sewn in.
Accessories that are purchased on their own/separately will have a Billingham label sewn in.
Craftmanship
- Made of dense, closed-cell foam
- 5-year manufacturers guarantee
- Made in England
Please note:
The size names of the Partitions were revised a few years ago therefore please double check the sizes before purchase.
Features at a Glance
Product information
All our shipments are fully insured. For shipments valued over $200, a direct signature will be required upon delivery.
We utilize various shipping carriers, with FedEx Express being our primary choice for 2-Day and Overnight shipping within the US, as well as International deliveries.
We accept returns within 14 days of delivery, subject to a restocking fee of up to 15%. This fee is not for profit, but to cover the costs associated with selling an item. Each return is evaluated individually, and we strive to minimize this fee. In many instances, we waive it entirely if the refund credit can be applied towards another item in the store.
Please note, all returned items must be in the condition in which they were shipped. If the items are returned in a different condition, we will not be able to accept them.
We highly recommend visiting us in person to experience our fine photographic tools before deciding which tool best fits your needs. Please note that our inventory is distributed among our three stores, and what you see online may be at any of these locations. Below are a few points that we’d like to make in order to meet your needs for in store pick up.
The location of each item is indicated online. For convenience, you can choose to pick up your item at any of our stores. Once purchased, the item should be ready for pick up within 4 hours at the designated store, although this might vary depending on the store's busyness and time of day. We request that you wait for a notification from us confirming that your order is ready for pick up, to ensure the best service.
If your chosen item is not available at your preferred store, we can transfer it there after purchase. If you want to pick up an item at a different store, select that store for pick up during checkout, or choose a regular shipping method and let us know your preferred pick up store via support@camerawest.com or by responding to your order confirmation email.
For any questions about in-store pick up, please email support@camerawest.com. We'll do our best to accommodate your needs.
We offer a concierge trade-in program for the gear you'd like to upgrade, cross-grade, or simply pass on to a new owner. This enables you to acquire the tools that fit your specific needs. The easiest way to trade is to bring your gear into one of our stores and meet with us in person. However, we also accommodate those who can't visit our stores. Our online process is both personal and simple.
To begin, fill out the form on our Trade // Sell page with the details of the fine photographic equipment or watches you'd like to trade in. One of our team members will then contact you to confirm any details we might need for an accurate estimate. We will provide an estimate that doesn’t only look at the value of your trade in but the whole picture of where you want to go. If the estimate is satisfactory to you, we can provide a shipping label for you to ship your gear to one of our stores for a final inspection and store credit. Finally, we apply that credit towards your new gear!
